Hinojosa, M., Aldaco, J., Castillo, M., (2017). Self-affine crack propagation paths on two types of paper, Revista Latinoamericana de Metalurgia y Materiales, 37(1), 35-44.

Bagudanch, I., García-Romeu, M. L., Centeno, G., Elías-Zuñiga, A., & Ciurana, J. (2015). Forming force and temperature effects on single point incremental forming of polyvinylchloride, Journal of Materials Processing Technology, 219, 221-229.

Soto, M., Boyer, T. A., Biradar, S., Ge, L., Vajtai, R., Elías-Zuñiga, A., et al., Effect of interwall interaction on the electronic structure of double-walled carbon nanotubes, Nanotechnology, 26(16), 2015.

D. Aguirre, J. Aldaco y M. Hinojosa, Microestructura, propagación y emisión acústica de grietas en dos papeles de celulosa, Revista Mexicana de Física, 61 (4) pp. 254-260, 2015.

Héctor Gilberto Barrón-González, Miguel Martínez-Espronceda, Jesús Daniel Trigo, Santiago Led, Luis Serrano, Lessons learned from the implementation of remote control for the interoperability standard ISO/IEEE11073-20601 in a standard weighing scale, Computer Methods and Programs in Biomedicine, DOI: 10.1016/j.cmpb.2015.09.015, 2015.

Ledezma, D.F., Ferguson, N.S., and Brennan, M.J., On the instabilities in a switchable stiffness system for vibration control, International Journal of Acoustics and Vibration ISSN1027-5851, Accepted, 2015.

Ledezma, D.F., Advances in Shock Vibration Isolation Using Nonlinear Methods, ingeniería: Investigación y Tecnología 2014, ISSN 1405-7743, 2015.

C. Rodríguez, M. Hinojosa, J. Aldaco and A. Cázares, Fracture Mechanisms in Fiber Reinforced Polymer Matrix Composites, Mater. Res. Soc. Symp. Proc. Vol. 1611 pp. 153-158, 2014.

Ledezma, D.F., Ferguson, N.S., Brennan, M.J., and Tang. B, An experimental nonlinear low dynamic stiffness device for shock isolation, Journal of Sound and Vibration 347, 1-13, In Press, ISSN 0022-460X, 2014.

Olvera, D., Elías-Zuñiga, A., Martínez-Alfaro, H., de Lacalle, L. N. L., Rodríguez, C. A., & Campa, F. J. , Determination of the stability lobes in milling operations based on homotopy and simulated annealing techniques, Mechatronics, 24(3), 177-185, 2014.

Miguel Martínez-Espronceda, Jesús D. Trigo, Santiago Led, H. Gilberto Barrón-González, Javier Redondo, Alfonso Baquero, Luis Serrano, Event-Driven, Pattern-Based Methodology for Cost-Effective Development of Standardized Personal Health Devices, Computer Methods and Programs in Biomedicine, vol 117(2), pp. 168-178, DOI: 10.1016/j.cmpb.2014.07.008, 2014.

H. Torres, O. Zapata, G. Idárraga, Modeling of coil design for induction hardening in an automotive spindle axle, Thermal Process Modeling: Proceedings from the 5th International Conference on Thermal Process Modeling and Computer Simulation, pp. 84-88, ISBN: 978-1-62708-068-2, 2014.

Elías-Zuñiga, A., Trejo, D. O., Real, I. F., & Martínez-Romero, O., A Transformation Method for Solving Conservative Nonlinear Two-Degree-of-Freedom Systems. Mathematical Problems in Engineering, 2014.

Hernández-Sandoval J., Samuel F.H., Valtierra S., The ambient and high temperature deformation behavior of the Al-Si-Cu-Mg alloy with minor Ti, Zr, Ti addition, Materials and Design, Vol. 58, pp. 89-101, June 2014.

Hernández-Sandoval J., Mohamed A.M., Samuel F.H., Valtierra S., Mechanical performance of a cast A354 aluminium alloy, Materials science Forum, Vol. 794-796, pp. 489-494, DOI:10.40281, 2014.

Hernández-Sandoval J., Samuel A.M., Valtierra S., Ni and Zr based intermetallics in Al-Si-Cu-Mg cast alloys, Metallography Microstructure and Analysis, Vol. 14, No. 4, ISSN 2192-9262, Aug. 2014.

Elías-Zuñiga, A., Solution of the damped cubic-quintic Duffing oscillator by using Jacobi elliptic functions, Applied Mathematics and Computation, 246, 474-481, 2014.

Ledezma-Ramirez, D. F., Ferguson, N. and Salas Zamarripa, A., A Mathematical Modeling of a Transient Vibration Control Strategy Using a Switchable Mass Stiffness Compound System, Shock and Vibration, vol. 2014, Article ID 565181, 10 pages, doi:10.1155/2014/565181, 2014.

Oscar Zapata-Hernández, Luis A. Reyes, Carlos Camurri, Claudia Carrasco, Nelson F. Garza-Montes-de-Oca, Rafael Colás, Quenching simulation of steel grinding balls, Revista de metalurgia, 2014.

Reyes, L. A., Cerda, R., & Guerrero-Mata, M. P., Simulation of Distortion during Quenching Process, In Thermal Process Modeling 2014::Proceedings from the Fifth International Conference on Thermal Process Modeling and Computer Simulation (p. 145), ASM International, June 2014.

Alvarado-Meza, M. A., García-Sánchez, E., Covarrubias-Alvarado, O., Salinas-Rodríguez, A., Guerrero-Mata, M.P., Colás, R., Effect of the High-Temperature Deformation on the Ms Temperature in a Low C Martensitic Stainless Steel, Journal of Materials Engineering and Performance, 22(2):345-350, 01/2013.

Bello Gómez, M. A., Guerrero Mata, M.P., Siller Carrillo, H. R., Salas Zamarripa, A. and Berber-Solano T.P., Effect of Varying the Heterogeneities Quantity and Distribution in the Mechanical Response of a Heterogeneous Material, IN ICSAAM, The 5th International Conference on Structural Analysis of Advanced Materials, Island of Kos, Greece, 2013.

Berber-Solano, T.P., Ajovalasit, M. and Giacomin, J., Effect of steering wheel acceleration frequency distribution on detection of road type Ingeniería Mecánica, Tecnología y Desarrollo, Sociedad Mexicana de Ingeniería Mecánica (SOMIM), Vol. 4 No. 4, pp. 145--151, 2013.

Hernández-Sandoval J., Mohamed A.M., Samuel F.H., Valtierra S., Quality performance of Al-SI-Mg-Cu alloys, International Journal Metallurgical and Materials Science and Engineering, Vol.3, Issue 5, Dec. 2013, pp. 9-18. ISSN(P): 2278-2516, ISSN(E): 2278-2524, 2013.

Ledezma, D.F., Ferguson, N.S., and Brennan, M.J., An Experimental Switchable Stiffness Device for Shock Isolation, Journal Of Sound And Vibration 331 (23), pp. 4987-5001, ISSN 0022-460X, November 2012.

Jáuregui, A., Guerrero-Mata, M. P., Monsalve, A., Artigas, A., Leduc, L. A., & Colás, R., Plastic deformation of low carbon steels, International Heat Treatment and Surface Engineering, 6(4), 164-167, 2012.

Castillo-Morales, M., Berber-Solano, T.P., Salas-Zamarripa, A., Effectiveness of the UIT in the fatigue crack growth to the 2024-T3 alloy, Journal Engineering Fracture Mechanics (revisión), 2012.

F. Palomar, I. Gómez, Au/TiO2 thin films prepared by dip-coating sol-gel and ultrasonic spray pyrolysis for photocatalytic applications, Applied Surface Science, ISSN: 0169-4332, 2012.

Bello Gómez, M. A., Guerrero Mata, M.P., Siller Carrillo, H. R. y Salas Zamarripa, A., Comparación de diferentes condiciones de tracción frontera en un RVE en el XVIII Congreso Internacional Anual de la SOMIM, Salamanca, Guanajuato, México, 2012.

J. Aldaco and M. Hinojosa, Simulación atomística de la fractura dinámica en un material frágil, Revista Mexicana de Física 58 (6) pp. 466-471, 2012.

Salas Zamarripa, A., Pinna C., Brown M., Guerrero Mata, M.P., Castillo Morales M. and Berber-Solano T.P., Identification of modes of fracture in a 2618-T6 aluminium alloy using stereophotogrammetry, Materials Characterization, 62, pp. 1141-1150, 2011.

Ledezma, D.F., Ferguson, N.S., and Brennan, M.J., Shock Isolation using an Isolator with Switchable Stiffness, Journal Of Sound And Vibration 330 (5), pp. 868-882, ISSN 0022-460X, February 2011.

Flor Palomar, Idalia Gómez, José Luis Cavazos, Thin films of TiO2 with Au nanoparticles for photocatalytic degradation of Methylene blue, Ceramic Transactions, Vol. 229, pp 13-19, ISBN 978-1-1180-6002-5, 2011.

José Luis Cavazos, Idalia Gómez and Martha Guerrero, Stabilization of Ferritic Stainless Steels with Zr and Ti Additions, Materials Science and Technology, 27 [2] 530-536, 2011.

René F. Cienfuegos, Leonardo Chávez, Sugeheidy Carranza Bernal, Laurie Jouanin, Guillame Maurie, Moisés Hinojosa, Elaboration and characterization of LA4NI3010 cathode material (SOFC) by sol-gel, Materials Research Society, 2011.

uanl zacatecas ciqa comimsa it tec